Fluorescent with oblique, transverse reflective strips. Two-toned. Breathable, windproof and water-repellent. Polyester filled padding. Fastening with zip and internal storm flap. Hood can fold into collar. Zipped inner pockets designed especially for a mobile with holes for headset wire and guide loops to keep wire accessible. Chest pockets with zip. D-ring. Pen pocket. Front pockets with a zip.
OEKO-TEX® STANDARD 100 - OEKO-TEX® STANDARD 100
EN ISO 20471 - class 2 - EN ISO 20471 - class 2
Hi-Vis Group A - Hi-Vis Group A
- OEKO-TEX® STANDARD 100
- EN ISO 20471 - class 2
- Hi-Vis Group A
Possibility of print on the chest pocket. When applying transfers on this product, the insulation can become slightly damaged by the heat. We recommend a transfer type that does not spread out on the product.
The product is certified with a maximum logo area of 0,5100m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement::
- Workwear logo stretch. Left breast pocket. Max 8x7 cm/3.1x2.7 inch
- Workwear logo. Special placement. Contact to discuss further
Man
Woman
Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
No liability accepted for product alterations.