Functional Trousers
MASCOT® REworked
ULTIMATE STRETCH
Work Trousers
Workwear
92% polyester/8% elastane
265 g/m²
ULTIMATE STRETCH.Shrinkage max. 2%.The product is certified to retain its qualities with 50 domestic washes.
Description
Domestic process.
Pro Label
No.
Wash process
Wash according to ISO 6330. Wash together with similar textiles/colours.
Wash temperature
Wash gently < 40ºC.
Wash chemistry
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
Reflective garments
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Disinfection
Clarify between local legislation and chemical supplier.
Drying process
Hang dry.
Zippers
Close any zippers before washing.
Fluorescent and with reflective tape. Has a water-repellent finish. ULTIMATE STRETCH fabric that is lightweight and durable. Double stitched seams on leg and crotch. Hidden stud fastening. Detachable holster pockets. Press stud fastening on innermost hanging tool pocket. Holster pocket with lined phone pocket, magnet fastening and integrated ID card holder. Detachable ID card holder. Holster pockets with Kevlar® and CORDURA® fabric reinforcements. Belt loops. Tool strap at both sides of waist. Fly with zip. Front pockets. Back pockets with reinforcement and flaps. Hidden tool straps on both sides. Button (detachable) for attaching knife holder. Ruler pocket with Kevlar® reinforcement. Thigh pockets with flaps. Thigh pocket with lined phone pocket and magnet fastening.
As the product is made of stretch material, a stretchable transfer must be used when printing on the product. You should choose a transfer that can be heated at a maximum of 145 degrees with consideration to print on the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with maximum (C44-C46) 0,3500 m² (C47-C68) 0,0400m² logo area. This approved area must not be exceeded. Logo respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement:
Measuring guide: K1 - The waist size is measured just above the navel (see measuring chart).
Leg length 40.5 cm (16 inches).
No liability accepted for product alterations.