Functional Trousers
ULTIMATE STRETCH
Work Trousers
Workwear
83% recycled polyester/17% elastolefin
205 g/m²
ULTIMATE STRETCH.Shrinkage max. 2%.The product is certified to retain it qualities with 50 domestic washes or ≥ 25 industrial washes.
Description
Domestic process.
Pro Label
No.
Wash process
Wash according to ISO 6330. Wash together with similar textiles/colours.
Wash temperature
Machine wash max 60ºC.
Wash chemistry
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
Reflective garments
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Disinfection
Clarify between local legislation and chemical supplier.
Drying process
Tumble dry: Max outlet / exhaust temp 80ºC, use cool down.
Zippers
Close any zippers before washing.
Fluorescent contrast colour and with reflective tapes. The polyester is made from recycled resources. Has a water-repellent finish. Two-toned. Lightweight. Ultimate stretch fabric with extra low weight and high wear resistance. Double stitched seams on leg and crotch. Hidden stud fastening. Ergonomically formed trouser leg. Belt loops. Fly with zip. Front pockets. Back pockets with reinforcement. Thigh pockets with flaps. Thigh pocket with phone pocket and flap with hidden press stud and integrated ID card holder. Detachable ID card holder. Thigh pocket with flap with room for hand scanner. CORDURA® (1000 D) reinforcements on knee. With print effects. Each standard leg length can be lengthened by 3 cm by releasing the internal red stitches.
As the product is made of stretch material, a stretchable transfer must be used when printing on the product. You should choose a transfer that can be heated at a maximum of 145 degrees with consideration to print on the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with maximum (82+90 cm) 0,0500 m² (76 cm) 0,0200 m²m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement:
No liability accepted for product alterations.