70% polyester/30% cotton
Twill/Ripstop.Shrinkage max. 2%.The product is certified to retain it qualities with 50 domestic washes or ≥ 25 industrial washes.
Wash according to ISO 6330. Wash together with similar textiles/colours.
Machine wash max 60ºC.
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Clarify between local legislation and chemical supplier.
Tumble dry: Max outlet / exhaust temp 80ºC, use cool down.
Close any zippers before washing.
Fluorescent with oblique, transverse reflective strips. Stretch fabric on parts of the product. Combination of the lightweight fabric quality 236 and ULTIMATE STRETCH in fabric quality 511. High collar. Fastening with two-way zip, storm flap and press studs. D-ring. Chest pocket with a zip. Elastic at cuffs. Double stitched seams on leg and crotch. Ergonomically formed trouser leg. Front pockets. Back pockets with reinforcement. Access to trousers from both sides. Hidden tool strap on right side. Reinforced ruler pocket. Thigh pockets with flaps. Adjustable kneepad pockets in durable CORDURA® (500 D). Simple individual adjustment of kneepad pocket height. Thigh pocket with phone pocket and flap with hidden press studs. Elastic in the back. With print effects. Each standard leg length can be lengthened by 3 cm by releasing the internal red stitching. We recommend 00418-100, 00718-100, 50451-916 and 20118-915 kneepads for this model. Co-certified together with kneepad type SHORT or LONG in accordance with EN 14404.
The product is certified with maximum 0,6400m² logo area. This approved area must not be exceeded. Logo respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
No liability accepted for product alterations.