Products

F0125-773 Safety Shoe

S1P - BOA® Fit System

MASCOT® FOOTWEAR FLEX

F0125-773-09118 Safety Shoe - black/light anthracite

Product

Flexible
Footwear with this symbol is extremely flexible where the shoes bend. This gives you more freedom to move around as you need to during the workday. Freedom for your feet.
Lightweight
The symbol indicates that the safety footwear has a much lower weight than average. Choose footwear with this symbol, if you are looking for flexible and lightweight footwear.
Composite toe cap
The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The composite toe cap does not contain metal. As composite is not thermally conductive it provides comfort in cold and warm environments.
Textile nail protection
Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
Stabilising and shock absorbing shank
The specially developed multi-functional shank is made of a stiff nylon material. The shank stabilises the middle part of the foot and makes the footwear bend at the right position. This shank includes a small shock-absorbing cushioning pad. The position of the shank ensures that the heel is in constant contact with this cushioning area, which provides a good foothold.
Scuff cap, suitable for working on the knees
A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
Non-marking sole – no scuff marks
Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.
PU/PU sole material, resistant to 140°C
Comfort soles as well as running soles are made of PU. The soles are resistant to 140°C. PU is a foam material, which is very shock-absorbing and slip-resistant. All MASCOT PU/PU soles are oil and petrol resistant.
Ladder grip
A sole edge under the sole prevents slippage on a ladder.
Shock-absorbing comfort sole
All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
Water-resistant in accordance with the standard
WRU is short for Water Repellent Upper and indicates that the upper material is water-repellent.
Oil/petrol resistant sole
The sole is oil and petrol resistant.

Sizes

1039

1040

1041

1042

1043

1044

1045

1046

1047

1048

Locate distributor Contact MASCOT

Compare Remove comparison
Add to Favourites Remove from Favourites

Download PDF

Main material/upper material

Textile

Size 42: 630 g

FT088-980-88 Impregnation Spray
FT089-980-88 Foam cleaning set

Flexible
Footwear with this symbol is extremely flexible where the shoes bend. This gives you more freedom to move around as you need to during the workday. Freedom for your feet.
Lightweight
The symbol indicates that the safety footwear has a much lower weight than average. Choose footwear with this symbol, if you are looking for flexible and lightweight footwear.
Composite toe cap
The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The composite toe cap does not contain metal. As composite is not thermally conductive it provides comfort in cold and warm environments.
Textile nail protection
Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
Stabilising and shock absorbing shank
The specially developed multi-functional shank is made of a stiff nylon material. The shank stabilises the middle part of the foot and makes the footwear bend at the right position. This shank includes a small shock-absorbing cushioning pad. The position of the shank ensures that the heel is in constant contact with this cushioning area, which provides a good foothold.
Scuff cap, suitable for working on the knees
A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
Non-marking sole – no scuff marks
Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.
PU/PU sole material, resistant to 140°C
Comfort soles as well as running soles are made of PU. The soles are resistant to 140°C. PU is a foam material, which is very shock-absorbing and slip-resistant. All MASCOT PU/PU soles are oil and petrol resistant.
Ladder grip
A sole edge under the sole prevents slippage on a ladder.
Shock-absorbing comfort sole
All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
Water-resistant in accordance with the standard
WRU is short for Water Repellent Upper and indicates that the upper material is water-repellent.
Oil/petrol resistant sole
The sole is oil and petrol resistant.

Main material/upper material

Textile

Size 42: 630 g

FT088-980-88 Impregnation Spray
FT089-980-88 Foam cleaning set

Product Information

Insole with optimal arch support that can counteract the tendency to flat foot.
The front part of the shoe bends flexibly with the foot.
The BOA® Fit System is made from extremely durable, high-quality materials. BOA® allows you to dial in to a fast, effortless, precision fit.
The composite toecap is completely free of metal. The composite material does not conduct heat or cold, so the composite toecap provides extra comfort in both hot and cold surroundings.
Shock-absorbing, soft and flexible two-component sole of PU/PU.
Slip resistant, durable sole (SRC-certified).
ESD Approved.

Social and environmental responsibility

Raw materials and processing

The product is covered by REACH

Manufacturing

Produced in Cambodia by MASCOT’s audited partners for more than 5 years

Transport and packaging

Transported from production to warehouse by transport partners who are ISO 14001-certified
Transported in shipments that make maximum use of space
The product packaging is made from or contains recycled materials
The order from MASCOT is packaged in packaging which is made from or contains recycled materials

The BOA® Fit System gives footwear an excellent fit and a solid foothold. BOA® consists of an adjustable dial, strong lightweight laces and friction-free guides.

Technical info
Certifications
User

The front part of the shoe bends flexibly with the foot. Opens and fastens with BOA®, which consists of a rotational dial, laces and guides. Uppers made of durable fabric. Composite toe cap. Nail protection of special textile material. Stabilising multi-function shank with integrated absorbing cushioning. Shock-absorbing, soft and flexible two-component sole of PU/PU. Non-marking sole – no scuff marks. TPU toe reinforcement. Suitable for working on the knees. Ladder grip. 5.0mm profile depth. Insole with optimal arch support that can counteract the tendency to flat foot. Shock-absorbing insoles are removable, durable and ergonomic. Textile breathable lining. Sole is oil and petrol resistant. ESD approved to EN IEC 61340-4-3: 2002.

Shoes and boots with midsole and toe cap. Not water resistant.
Footwear with an ESD label avoid electrostatic charging and are able to conduct away controlled static electricity from the body. This will avoid damages to, for example, sensitive electronic components.
Excellent traction with ultra slip resistant soles. Approved by both SRA (tested with soap on ceramics) and SRB (tested with glycerol on steel), which automatically achieves the best standard for slip-resistant soles, SRC.
EN ISO 20345 is a European standard for safety footwear that ensures that safety shoes, boots and sandals conform to the necessary requirements of working in areas where safety is a high priority. All safety footwear from MASCOT® FOOTWEAR is certified in accordance with EN ISO 20345.
The DGUV Regel 112-191 refers to foot and knee protection. More concretely, it means that each orthopaedic shoe modification or usage of an insole must be confirmed by an independent testing institute to ensure that the safety shoe still conforms to the requirements of its safety class (e.g. S3 or S1P). Therefore, orthopaedic modifications on MASCOT shoes can only be performed by the company Mander-Malms Schuhtechnik GmbH.

Safety Class S1P
ESD approved
Ultra Slip Resistant Sole
EN ISO 20345
Orthopaedic Footwear: Suitable for modifications

Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
Light industry and logistics
Look for this symbol if you work in industries related to electronics, assembly, production, warehousing or transport.

Remarks

MASCOT's insoles with arch support (FT090, FT091, FT092) are certified for this shoe.

No liability accepted for product alterations.

FT088-980

MASCOT® FOOTWEAR ACCESSORIES

transparent

	EU	UK	US	F
Size	1039	M6	M7	M6
Weight	1.520	Kg
Volume	16.000	L
EAN	5711074609673

	EU	UK	US	F
Size	1040	M6.5	M7.5	M6.5
Weight	1.540	Kg
Volume	16.000	L
EAN	5711074609697

	EU	UK	US	F
Size	1045	M10.5	M11.5	M10.5
Weight	1.840	Kg
Volume	16.000	L
EAN	5711074609796

F0125-773 Safety Shoe

Find your size

Main material/upper material

Main material/upper material

Product Information

Social and environmental responsibility

Remarks

Mix & Match

Similar product types

Documents

EU

UK