Products

F0454-902 Safety Shoe

S3 - laces

MASCOT® FOOTWEAR INDUSTRY

Product

Ergonomic aluminium toe cap
The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The ergonomically correct shaped aluminium toe cap has a spacious fit that allows place for the toes to move, e.g., when kneeling, and provides additional protection for the little toe and the big toe.
Textile nail protection
Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
Stabilising and shock absorbing shank
The specially developed multi-functional shank is made of a stiff nylon material. The shank stabilises the middle part of the foot and makes the footwear bend at the right position. This shank includes a small shock-absorbing cushioning pad. The position of the shank ensures that the heel is in constant contact with this cushioning area, which provides a good foothold.
Scuff cap, suitable for working on the knees
A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
Ladder grip
A sole edge under the sole prevents slippage on a ladder.
Shock-absorbing comfort sole
All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
PU/rubber sole material, resistant to 300°C contact heat
The comfort sole is made of PU and the running sole is made of rubber. Rubber is very heat resistant and can resist temperatures up to 300°C contact heat. All MASCOT PU/rubber soles are oil and petrol resistant as well as resistant to certain chemicals.
Oil/petrol resistant sole
The sole is oil and petrol resistant.
Water-resistant in accordance with the standard
WRU is short for Water Repellent Upper and indicates that the upper material is water-repellent.
Non-marking sole – no scuff marks
Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.

Sizes

1139

1140

1141

1142

1143

1144

1145

1146

1147

1148

Locate distributor Contact MASCOT

Compare Remove comparison
Add to Favourites Remove from Favourites

Download PDF

Main material/upper material

Full grain leather

Size 42: 700 g

FT088-980-88 Impregnation Spray
FT089-980-88 Foam cleaning set

Ergonomic aluminium toe cap
The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The ergonomically correct shaped aluminium toe cap has a spacious fit that allows place for the toes to move, e.g., when kneeling, and provides additional protection for the little toe and the big toe.
Textile nail protection
Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
Stabilising and shock absorbing shank
The specially developed multi-functional shank is made of a stiff nylon material. The shank stabilises the middle part of the foot and makes the footwear bend at the right position. This shank includes a small shock-absorbing cushioning pad. The position of the shank ensures that the heel is in constant contact with this cushioning area, which provides a good foothold.
Scuff cap, suitable for working on the knees
A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
Ladder grip
A sole edge under the sole prevents slippage on a ladder.
Shock-absorbing comfort sole
All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
PU/rubber sole material, resistant to 300°C contact heat
The comfort sole is made of PU and the running sole is made of rubber. Rubber is very heat resistant and can resist temperatures up to 300°C contact heat. All MASCOT PU/rubber soles are oil and petrol resistant as well as resistant to certain chemicals.
Oil/petrol resistant sole
The sole is oil and petrol resistant.
Water-resistant in accordance with the standard
WRU is short for Water Repellent Upper and indicates that the upper material is water-repellent.
Non-marking sole – no scuff marks
Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.

Main material/upper material

Full grain leather

Size 42: 700 g

FT088-980-88 Impregnation Spray
FT089-980-88 Foam cleaning set

Product Information

The ergonomic aluminium toe cap provides more protection and gives greater freedom and comfort of movement.
The flexible nail protection of special textile increases comfort and protects against cold. In addition, the textile midsole is larger and better protects against nails and sharp objects in a wider area compared with a steel midsole.
Stabilisation with MASCOT’s patented multi-function shank, makes our footwear suitable even when working on uneven surfaces or on ladders.
Shock-absorbing insoles are removable, durable and anti-static.
Sole of PU/rubber is especially designed for demanding environments and can resist temperatures up to 300° C contact heat.
The sole is oil and petrol resistant.
ESD approved to EN IEC 61340-4-3: 2018 + EN 61340-5-1: 2016.

Social and environmental responsibility

Raw materials and processing

The product is covered by REACH

Manufacturing

Produced in Cambodia by MASCOT’s audited partners for more than 5 years

Transport and packaging

Transported from production to warehouse by transport partners who are ISO 14001-certified
Transported in shipments that make maximum use of space
The product packaging is made from or contains recycled materials
The order from MASCOT is packaged in packaging which is made from or contains recycled materials

Technical info
Certifications
User

Lace fastening. Ergonomically formed aluminium toe cap. Nail protection of special textile material. Stabilising multi-function shank with integrated absorbing cushioning. Midsole of PU. Sole made of rubber with extreme slip resistance. Removable insoles, anti-static and durable. Absorbs and removes moisture. Moulded PU scuff cap. The sole is oil and petrol resistant. Heat resistant sole up to 300°C contact heat. Ladder grip. Shock absorbing insole. Bootleg in water-repellent and breathable material. Suitable for working on the knees. Heel cap. Non-marking sole – no scuff marks. ESD approved to EN IEC 61340-4-3: 2018 + EN 61340-5-1: 2016.

Water-repellent / waterproof shoes and boots with midsole and toe cap
Excellent traction with ultra slip resistant soles. Approved by both SRA (tested with soap on ceramics) and SRB (tested with glycerol on steel), which automatically achieves the best standard for slip-resistant soles, SRC.
EN ISO 20345 is a European standard for safety footwear that ensures that safety shoes, boots and sandals conform to the necessary requirements of working in areas where safety is a high priority. All safety footwear from MASCOT® FOOTWEAR is certified in accordance with EN ISO 20345.
Footwear with an ESD label avoid electrostatic charging and are able to conduct away controlled static electricity from the body. This will avoid damages to, for example, sensitive electronic components.

Safety Class S3
Ultra Slip Resistant Sole
EN ISO 20345
ESD approved

Building and construction
Look for this symbol if you work as a contractor, road worker or with demolition or similar sectors.
Heavy industry
Look for this symbol if you work with e.g. metalworking, machinery manufacture or in a foundry.
Offshore and wind sector
Look for this symbol if you need safety products for the offshore and wind sector as well as other industries.