65% polyester/35% cotton
Twill.Do not soak.Wash separately.The product is certified to retain it qualities with 50 domestic washes or 50 industrial washes.The dirt-repellent finish is reactivated by tumble drying according to the washing instructions.
Wash according to ISO 6330. Wash together with similar textiles/colours.
Machine wash max 60ºC.
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Clarify between local legislation and chemical supplier.
Tumble dry: Max outlet / exhaust temp 80ºC, use cool down.
Close any zippers before washing.
Fluorescent and with reflective tapes. The surface treatment makes the product dirt-repellent. Two-toned. Triple stitched seams at leg and crotch. Adjustable straps in short, strong elastic with plastic buckles. Large bib pocket with flap and press studs. Inner pocket with hook and loop band fastening. Adjustable waist. Front pockets. Fly with zip. Reinforced back pockets - one with flap and hook and loop band fastening. Adjustable hammer loop. Thigh pocket with several compartments, flap and adjustable hook and loop band fastening. Pen pockets. Thigh phone pocket with flap and adjustable hook and loop band fastening. Ruler pocket. Kneepad pockets. We recommend 00718-100, 50451-916 & 20118-915 kneepads for this model. Co-certified together with kneepad type LONG in accordance with EN 14404.
The product is certified with maximum 0,1700m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
No liability accepted for product alterations.