Functional Trousers
MASCOT® REworked
ULTIMATE STRETCH
Work Trousers
Workwear
100% polyester
300 g/m²
Canvas structure.Do not use fabric softner.
Description
Domestic process.
Pro Label
No.
Wash process
Wash according to ISO 6330. Wash together with similar textiles/colours.
Wash temperature
Wash gently < 40ºC.
Wash chemistry
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
Reflective garments
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Disinfection
Clarify between local legislation and chemical supplier.
Drying process
Hang dry.
Zippers
Close any zippers before washing.
Fluorescent and with vertical and oblique, transverse reflective strips. Two-toned. Breathable, wind and waterproof. Taped seams. Detachable lined hood with adjustable drawstring. Quilt lining can zip out and be used separately - has ribbed collar and pockets. Inner collar of soft, durable material. Fastening with two-way zip, double storm flap and hidden press studs. Zipped pockets under storm flap. Chest pocket with a zip. Chest pocket with flap and magnetic fastening. D-ring. Pen holder. Front pockets - two open and two with flap and press stud. Inner pocket with zip. Ergonomically shaped sleeves allow for high freedom of movement. Zipped sleeve pocket. Rib (hidden in storm flap) and press stud fastening at cuffs. Adjustable elastic drawstring at waist. Products with magnets must not be used by people with pacemakers/ICD or similar devices due to the risk of a magnetic reaction caused where the magnets are placed.
The product is certified with maximum 0,2200m² logo area. This approved area must not be exceeded. Logo respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement:
No liability accepted for product alterations.