Functional Trousers
MASCOT® REworked
ULTIMATE STRETCH
Work Trousers
Workwear
50% polyester/50% cotton
150 g/m²
Knit fabric.Shrinkage max. 5%.The product is according to EN ISO 20471 certified to retain its qualities with 50 domestic washes.
Description
Domestic process.
Pro Label
No.
Wash process
Wash according to ISO 6330. Wash together with similar textiles/colours.
Wash temperature
Machine wash max 60ºC.
Wash chemistry
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
Reflective garments
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Disinfection
Clarify between local legislation and chemical supplier.
Drying process
Tumble dry: Max outlet / exhaust temp 60ºC, use cool down.
Zippers
Close any zippers before washing.
Premium. Fluorescent with oblique, transverse reflective strips. Two-toned. Modern fit. Comfortable cotton on the inside and durable stretch polyester on the outside. Square jacquard pattern. Elastic reflective strips. Round neck. Rib at neck. Neckband.
As the product is made of stretch material, a stretchable transfer must be used when printing on the product. You should choose a transfer that can be heated at a maximum of 145 degrees with consideration to print on the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with maximum (M-5XL) 0,0000 m² (S) 0,2300m² logo area. This approved area must not be exceeded. Logo respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement:
No liability accepted for product alterations.