92% polyester/8% elastane
ULTIMATE STRETCH.Shrinkage max. 2%.The product is certified to retain its qualities with 50 domestic washes.
Wash according to ISO 6330. Wash together with similar textiles/colours.
Wash gently < 40ºC.
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Clarify between local legislation and chemical supplier.
Close any zippers before washing.
Fluorescent contrast colour and with reflective tapes. Has a water-repellent finish. Two-toned. ULTIMATE STRETCH fabric that is lightweight and durable. Double stitched seams on leg and crotch. Ergonomically formed trouser leg. Detachable holster pockets. Press stud fastening on innermost hanging tool pocket. Holster pocket with lined phone pocket and magnet fastening. Holster pockets with Kevlar® and CORDURA® fabric reinforcements. Belt loops. Tool strap at both sides of waist. Fastening with two-way zip and double storm flap. Front pockets. Back pockets with reinforcement and flaps. Hidden tool straps on both sides. Button (detachable) for attaching knife holder. Ruler pocket with Kevlar® reinforcement. Thigh pockets with flaps. Kneepad pockets in CORDURA ® two-way stretch fabric with ventilation. Simple individual adjustment of kneepad pocket height. Thigh pocket with lined phone pocket, magnet fastening and integrated ID card holder. Detachable ID card holder. Vertical zip to allow for ventilation on back of thigh. Chest pocket with pen pocket. Phone chest pocket with flap. Adjustable shoulder straps with hook and loop band. Ventilation in the back. With print effects. Each standard leg length can be lengthened by 3 cm by releasing the internal red stitching. We recommend 00418-100, 00718-100, 50451-916 and 20118-915 kneepads for this model. Co-certified together with kneepad type SHORT or LONG in accordance with EN 14404.
As the product is made of stretch material, a stretchable transfer must be used when printing on the product. You should choose a transfer that can be heated at a maximum of 145 degrees with consideration to print on the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with maximum (82+90 cm) 0,0500 m² (76 cm) 0,0200m² logo area. This approved area must not be exceeded. Logo respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
No liability accepted for product alterations.