Products

F0135-902 Safety Boot

S3 - laces

MASCOT® FOOTWEAR ENERGY

Product

Flexible
Footwear with this symbol is extremely flexible where the shoes bend. This gives you more freedom to move around as you need to during the workday. Freedom for your feet.
Lightweight
The symbol indicates that the safety footwear has a much lower weight than average. Choose footwear with this symbol, if you are looking for flexible and lightweight footwear.
Metal free
Footwear with this symbol contains no metal. The midsole, toe cap and eyelets are entirely metal-free. As such, the footwear is very useful, for example, in airports.
Composite toe cap
The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The composite toe cap does not contain metal. As composite is not thermally conductive it provides comfort in cold and warm environments.
Textile nail protection
Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
Scuff cap, suitable for working on the knees
A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
Non-marking sole – no scuff marks
Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.
PU/PU sole material, resistant to 140°C
Comfort soles as well as running soles are made of PU. The soles are resistant to 140°C. PU is a foam material, which is very shock-absorbing and slip-resistant. All MASCOT PU/PU soles are oil and petrol resistant.
Ladder grip
A sole edge under the sole prevents slippage on a ladder.
Shock-absorbing comfort sole
All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
Water-resistant in accordance with the standard
WRU is short for Water Repellent Upper and indicates that the upper material is water-repellent.
Oil/petrol resistant sole
The sole is oil and petrol resistant.

Sizes

1039

1040

1041

1042

1043

1044

1045

1046

1047

1048

Locate distributor Contact MASCOT

Compare Remove comparison
Add to Favourites Remove from Favourites

Download PDF

Main material/upper material

Full grain leather

Size 42: 630 g

FT088-980-88 Impregnation Spray
FT089-980-88 Foam cleaning set

Flexible
Footwear with this symbol is extremely flexible where the shoes bend. This gives you more freedom to move around as you need to during the workday. Freedom for your feet.
Lightweight
The symbol indicates that the safety footwear has a much lower weight than average. Choose footwear with this symbol, if you are looking for flexible and lightweight footwear.
Metal free
Footwear with this symbol contains no metal. The midsole, toe cap and eyelets are entirely metal-free. As such, the footwear is very useful, for example, in airports.
Composite toe cap
The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The composite toe cap does not contain metal. As composite is not thermally conductive it provides comfort in cold and warm environments.
Textile nail protection
Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
Scuff cap, suitable for working on the knees
A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
Non-marking sole – no scuff marks
Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.
PU/PU sole material, resistant to 140°C
Comfort soles as well as running soles are made of PU. The soles are resistant to 140°C. PU is a foam material, which is very shock-absorbing and slip-resistant. All MASCOT PU/PU soles are oil and petrol resistant.
Ladder grip
A sole edge under the sole prevents slippage on a ladder.
Shock-absorbing comfort sole
All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
Water-resistant in accordance with the standard
WRU is short for Water Repellent Upper and indicates that the upper material is water-repellent.
Oil/petrol resistant sole
The sole is oil and petrol resistant.

Main material/upper material

Full grain leather

Size 42: 630 g

FT088-980-88 Impregnation Spray
FT089-980-88 Foam cleaning set

Product Information

The flexible and light MASCOLAYER® textile nail protection guarantees optimum protection and excellent walking comfort.
The composite toecap is completely free of metal. The composite material does not conduct heat or cold, so the composite toecap provides extra comfort in both hot and cold surroundings.
Removable insole with optimal arch support that can counteract the tendency to flat foot.
Insert in the midsole of shock-absorbing lightweight material.
Shock-absorbing, soft and flexible two-component sole of PU/PU.
ESD Approved.

Social and environmental responsibility

Raw materials and processing

The product is covered by REACH

Manufacturing

Produced in China by MASCOT’s audited partners

Transport and packaging

Transported from production to warehouse by transport partners who are ISO 14001-certified
Transported in shipments that make maximum use of space
The product packaging is made from or contains recycled materials
The order from MASCOT is packaged in packaging which is made from or contains recycled materials

MASCOLAYER® nail protection is a textile midsole that guarantees protection against nails and sharp objects underneath the footwear. This type of nail protection is extremely flexible, soft and light. Some of the benefits of MASCOLAYER® nail protection include making the footwear more flexible. This in turn provides excellent protection against cold and heat and increases comfort for the user. As MASCOLAYER® nail protection is a textile nail protection, you can get a shoe that is 100% metal free and therefore conducts neither heat nor cold.

Technical info
Certifications
User

The front part of the shoe bends flexibly with the foot. Metal free. Lace fastening. Composite toe cap. MASCOLAYER® nail protection. Insert in the midsole of shock-absorbing lightweight material. Shock-absorbing, soft and flexible two-component sole of PU/PU. Durable non-marking outsole. TPU toe reinforcement. Bootleg in breathable high quality full grain leather. Heat resistant sole up to 140°C. Ladder grip. 5.0mm profile depth. Removable insoles with optimal arch support that can counteract the tendency to flat foot. Sole is oil and petrol resistant. ESD approved to EN IEC 61340-4-3: 2002.

Water-repellent / waterproof shoes and boots with midsole and toe cap
Excellent traction with ultra slip resistant soles. Approved by both SRA (tested with soap on ceramics) and SRB (tested with glycerol on steel), which automatically achieves the best standard for slip-resistant soles, SRC.
Footwear with an ESD label avoid electrostatic charging and are able to conduct away controlled static electricity from the body. This will avoid damages to, for example, sensitive electronic components.
EN ISO 20345 is a European standard for safety footwear that ensures that safety shoes, boots and sandals conform to the necessary requirements of working in areas where safety is a high priority. All safety footwear from MASCOT® FOOTWEAR is certified in accordance with EN ISO 20345.
The DGUV Regel 112-191 refers to foot and knee protection. More concretely, it means that each orthopaedic shoe modification or usage of an insole must be confirmed by an independent testing institute to ensure that the safety shoe still conforms to the requirements of its safety class (e.g. S3 or S1P). Therefore, orthopaedic modifications on MASCOT shoes can only be performed by the company Mander-Malms Schuhtechnik GmbH.

Safety Class S3
Ultra Slip Resistant Sole
ESD approved
EN ISO 20345
Orthopaedic Footwear: Suitable for modifications

Craftsmen and building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc. Products suitable for outdoor work.
Building and construction
Look for this symbol if you work as a contractor, road worker or with demolition or similar sectors.
Heavy industry
Look for this symbol if you work with e.g. metalworking, machinery manufacture or in a foundry.
Offshore and wind sector
Look for this symbol if you need safety products for the offshore and wind sector as well as other industries.