F0141-902 Safety Boot

MASCOT® FOOTWEAR FLEX

Available from June 2019

Measuring Chart

Click a size for more information

	EU	UK	US
Size	1039	M6	M7
EAN	5711074739356

	EU	UK	US
Size	1040	M6.5	M7.5
EAN	5711074739363

	EU	UK	US
Size	1041	M7	M8
EAN	5711074739370

	EU	UK	US
Size	1042	M8	M9
EAN	5711074739387

	EU	UK	US
Size	1043	M9	M10
EAN	5711074739394

	EU	UK	US
Size	1044	M10	M11
EAN	5711074739400

	EU	UK	US
Size	1045	M10.5	M11.5
EAN	5711074739417

	EU	UK	US
Size	1046	M11	M12
EAN	5711074739424

	EU	UK	US
Size	1047	M12	M13
EAN	5711074739431

	EU	UK	US
Size	1048	M13	M14
EAN	5711074739448

Locate distributor Contact MASCOT

Compare Remove comparison
Add to Favourites Remove from Favourites

Product Information

Flexible
Footwear with this symbol is extremely flexible where the shoes bend. This gives you more freedom to move around as you need to during the workday. Freedom for your feet.
Lightweight
The symbol indicates that the safety footwear has a much lower weight than average. Choose footwear with this symbol, if you are looking for flexible and lightweight footwear.
Metal free
Footwear with this symbol contains no metal. The midsole, toe cap and eyelets are entirely metal-free. As such, the footwear is very useful, for example, in airports.
Composite toe cap
The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The composite toe cap does not contain metal. As composite is not thermally conductive it provides comfort in cold and warm environments.
Textile nail protection
Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
Stabilising and shock absorbing shank
The specially developed multi-functional shank is made of a stiff nylon material. The shank stabilises the middle part of the foot and makes the footwear bend at the right position. This shank includes a small shock-absorbing cushioning pad. The position of the shank ensures that the heel is in constant contact with this cushioning area, which provides a good foothold.
Scuff cap, suitable for working on the knees
A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
Non-marking sole – no scuff marks
Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.
Ultra slip resistant sole
Excellent traction with ultra slip resistant soles. Approved by both SRA (tested with soap on ceramics) and SRB (tested with glycerol on steel), which automatically achieves the best standard for slip-resistant soles, SRC.
PU/PU sole material, resistant to 140°C
Comfort soles as well as running soles are made of PU. The soles are resistant to 140°C. PU is a foam material, which is very shock-absorbing and slip-resistant. All MASCOT PU/PU soles are oil and petrol resistant.
Ladder grip
A sole edge under the sole prevents slippage on a ladder.
Shock-absorbing comfort sole
All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
Oil/petrol resistant sole
The sole is oil and petrol resistant and resistant to certain chemicals.

The front part of the shoe bends flexibly with the foot.
The composite toecap is completely free of metal. The composite material does not conduct heat or cold, so the composite toecap provides extra comfort in both hot and cold surroundings.
Insole with optimal arch support that can counteract the tendency to flat foot.
Stabilisation with MASCOT’s patented multi-function shank, makes our footwear suitable even when working on uneven surfaces or on ladders.
Shock-absorbing, soft and flexible two-component sole of PU/PU.
The sole is oil and petrol resistant.

Full grain leather

Size 42: 630 g

FT088-980-88 Impregnation Spray
FT089-980-88 Foam cleaning set

Mascotex® upper material provides breathable and waterproof footwear by means of a membrane in the material. To comply with the norm for waterproof footwear, the footwear must be able to resist water for at least four hours. Mascotex® complies with this norm.

Technical info
Certifications
User

The front part of the shoe bends flexibly with the foot. Metal free. Lace fastening. Waterproof membrane of MASCOTEX®. Composite toe cap. Nail protection of special textile material. Stabilising multi-function shank with integrated absorbing cushioning. Shock-absorbing, soft and flexible two-component sole of PU/PU. Non-marking sole – no scuff marks. TPU toe reinforcement. Suitable for working on the knees. Ladder grip. 5.0mm profile depth. Insole with optimal arch support that can counteract the tendency to flat foot. Shock-absorbing insoles are removable, durable and ergonomic. Textile breathable lining. Sole is oil and petrol resistant.

Water-repellent / waterproof shoes and boots with midsole and toe cap
Excellent traction with slip resistant soles. Approved by both SRA (tested with soap on ceramics) and SRB (tested with oil on steel), which automatically achieves the best standard for slip-resistant soles, SRC.
EN ISO 20345 is a European standard for safety footwear that ensures that safety shoes, boots and sandals conform to the necessary requirements of working in areas where safety is a high priority. All safety footwear from MASCOT® FOOTWEAR is certified in accordance with EN ISO 20345 and is also covered by safety classes S1P and S3.
The DGUV Regel 112-191 refers to foot and knee protection. More concretely, it means that each orthopaedic shoe modification or usage of an insole must be confirmed by an independent testing institute to ensure that the safety shoe still conforms to the requirements of its safety class (e.g. S3 or S1P). Therefore, orthopaedic modifications on MASCOT shoes can only be performed by the company Mander-Malms Schuhtechnik GmbH.

Safety Class S3
Ultra Slip Resistant Sole
EN ISO 20345
Orthopaedic Footwear: Suitable for modifications

Construction
Find solid and hard-wearing footwear with this symbol if you are a bricklayer, hod carrier, labourers, roofer, rail worker or in any other similar trade.
Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
Heavy industry
Keep an eye open for this symbol if you work with metalworking, machinery manufacture or in a foundry.
Light industry and logistics
This symbol helps you find footwear for such industries as electronics and assembly, warehousing, transport and related areas.