Products

F0165-902 Safety Boot

S3 - laces

BATURA PLUS | MASCOT® FOOTWEAR INDUSTRY

F0165-902-0907 Safety Boot - black/yellow

Product

Ergonomic aluminium toe cap
The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The ergonomically correct shaped aluminium toe cap has a spacious fit that allows place for the toes to move, e.g., when kneeling, and provides additional protection for the little toe and the big toe.
Textile nail protection
Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
Stabilising and shock absorbing shank
The specially developed multi-functional shank is made of a stiff nylon material. The shank stabilises the middle part of the foot and makes the footwear bend at the right position. This shank includes a small shock-absorbing cushioning pad. The position of the shank ensures that the heel is in constant contact with this cushioning area, which provides a good foothold.
Ankle protection
The wearer's ankle is protected against blows from the side by MASCOT's specially developed protection pad at the ankle bone on the inner and outer side of the footwear.
Scuff cap, suitable for working on the knees
A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
Oil/petrol resistant sole
The sole is oil and petrol resistant.
PU/rubber sole material, resistant to 300°C contact heat
The comfort sole is made of PU and the running sole is made of rubber. Rubber is very heat resistant and can resist temperatures up to 300°C contact heat. All MASCOT PU/rubber soles are oil and petrol resistant as well as resistant to certain chemicals.
Ladder grip
A sole edge under the sole prevents slippage on a ladder.
Shock-absorbing comfort sole
All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
Water-resistant in accordance with the standard
WRU is short for Water Repellent Upper and indicates that the upper material is water-repellent.

Sizes

1139

1140

1141

1142

1143

1144

1145

1146

1147

1148

Locate distributor Contact MASCOT

Compare Remove comparison
Add to Favourites Remove from Favourites

Download PDF

Full grain

Size 42: 940 g

FT088-980-88 Impregnation Spray
FT089-980-88 Foam cleaning set

Ergonomic aluminium toe cap
The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The ergonomically correct shaped aluminium toe cap has a spacious fit that allows place for the toes to move, e.g., when kneeling, and provides additional protection for the little toe and the big toe.
Textile nail protection
Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
Stabilising and shock absorbing shank
The specially developed multi-functional shank is made of a stiff nylon material. The shank stabilises the middle part of the foot and makes the footwear bend at the right position. This shank includes a small shock-absorbing cushioning pad. The position of the shank ensures that the heel is in constant contact with this cushioning area, which provides a good foothold.
Ankle protection
The wearer's ankle is protected against blows from the side by MASCOT's specially developed protection pad at the ankle bone on the inner and outer side of the footwear.
Scuff cap, suitable for working on the knees
A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
Oil/petrol resistant sole
The sole is oil and petrol resistant.
PU/rubber sole material, resistant to 300°C contact heat
The comfort sole is made of PU and the running sole is made of rubber. Rubber is very heat resistant and can resist temperatures up to 300°C contact heat. All MASCOT PU/rubber soles are oil and petrol resistant as well as resistant to certain chemicals.
Ladder grip
A sole edge under the sole prevents slippage on a ladder.
Shock-absorbing comfort sole
All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
Water-resistant in accordance with the standard
WRU is short for Water Repellent Upper and indicates that the upper material is water-repellent.

Full grain

Size 42: 940 g

FT088-980-88 Impregnation Spray
FT089-980-88 Foam cleaning set

Product Information

Ergonomically designed aluminum toe cap for freedom of movement.
Three-layer ankle protection absorbs and spreads the pressure and impact on the ankle, certified according to EN ISO 20345.
Extremely durable PU scuff cap makes the footwear ideal for working on the knees.
Sole of PU/rubber is especially designed for demanding environments and can resist temperatures up to 300° C contact heat.
Flame retardant Nomex® laces.
Slip resistant and hard wearing outsole (SRC-certified) - Oil and petrol resistant as well as resistant to certain chemicals.

Social and environmental responsibility

Raw materials and processing

The product is covered by REACH

Manufacturing

Produced in Cambodia by MASCOT’s audited partners for more than 5 years

Transport and packaging

Transported from production to warehouse by transport partners who are ISO 14001-certified
Transported in shipments that make maximum use of space
The product packaging is made from or contains recycled materials
The order from MASCOT is packaged in packaging which is made from or contains recycled materials

Technical info
Certifications
User

Ergonomically formed aluminium toe cap. Nail protection of special textile material. Stabilising multi-function shank with integrated absorbing cushioning. MASCOT's innovative ankle protection safeguards against blows and pressure from the sides. Sole of PU/rubber with extreme slip resistance. Removable insoles, anti-static and durable. Absorbs and removes moisture. Moulded PU scuff cap. Suitable for working on the knees. The sole is oil and petrol resistant. Heat resistant sole up to 300°C contact heat. Ladder grip. Shock absorbing comfort sole. TPU heel cap. Moisture absorbing Drylex® inside. Bootleg in water-repellent and breathable material. Sewn with flame retardant Nomex® thread on front part of footwear. Flame retardant Nomex® laces. Heel cap. Folded tongue prevents the ingress of dirt. Lace fastening with nickel free metal hooks. 3.5mm profile depth.

Water-repellent / waterproof shoes and boots with midsole and toe cap
Excellent traction with ultra slip resistant soles. Approved by both SRA (tested with soap on ceramics) and SRB (tested with glycerol on steel), which automatically achieves the best standard for slip-resistant soles, SRC.
EN ISO 20345 is a European standard for safety footwear that ensures that safety shoes, boots and sandals conform to the necessary requirements of working in areas where safety is a high priority. All safety footwear from MASCOT® FOOTWEAR is certified in accordance with EN ISO 20345.
The DGUV Regel 112-191 refers to foot and knee protection. More concretely, it means that each orthopaedic shoe modification or usage of an insole must be confirmed by an independent testing institute to ensure that the safety shoe still conforms to the requirements of its safety class (e.g. S3 or S1P). Therefore, orthopaedic modifications on MASCOT shoes can only be performed by the company Mander-Malms Schuhtechnik GmbH.

Safety Class S3
Ultra Slip Resistant Sole
EN ISO 20345
Orthopaedic Footwear: Suitable for modifications

Building and construction
Look for this symbol if you work as a contractor, road worker or with demolition or similar sectors.
Heavy industry
Look for this symbol if you work with e.g. metalworking, machinery manufacture or in a foundry.
Offshore and wind sector
Look for this symbol if you need safety products for the offshore and wind sector as well as other industries.