F0463-902 Safety Boot

S3 - BOA® Fit System - waterproof
MASCOT® FOOTWEAR INDUSTRY
F0463-902-09 Safety Boot - black
F0463-902-09 Safety Boot - black
  • Product
F0463-902-09 Safety Boot - black
  • Ergonomic aluminium toe cap Ergonomic aluminium toe cap
    The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The ergonomically correct shaped aluminium toe cap has a spacious fit that allows place for the toes to move, e.g., when kneeling, and provides additional protection for the little toe and the big toe.
  • Textile nail protection Textile nail protection
    Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
  • Stabilising and shock absorbing shank Stabilising and shock absorbing shank
    The specially developed multi-functional shank is made of a stiff nylon material. The shank stabilises the middle part of the foot and makes the footwear bend at the right position. This shank includes a small shock-absorbing cushioning pad. The position of the shank ensures that the heel is in constant contact with this cushioning area, which provides a good foothold.
  • Scuff cap, suitable for working on the knees Scuff cap, suitable for working on the knees
    A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
  • Ladder grip Ladder grip
    A sole edge under the sole prevents slippage on a ladder.
  • Shock-absorbing comfort sole Shock-absorbing comfort sole
    All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
  • Oil/petrol resistant sole Oil/petrol resistant sole
    The sole is oil and petrol resistant.
  • PU/rubber sole material, resistant to 300°C contact heat PU/rubber sole material, resistant to 300°C contact heat
    The comfort sole is made of PU and the running sole is made of rubber. Rubber is very heat resistant and can resist temperatures up to 300°C contact heat. All MASCOT PU/rubber soles are oil and petrol resistant as well as resistant to certain chemicals.
  • Non-marking sole – no scuff marks Non-marking sole – no scuff marks
    Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.
  • Waterproof Waterproof
    Look out for this symbol if you want footwear that is waterproof. Footwear bearing this symbol will keep your feet dry throughout the entire working day.
  • Cold isolating (CI) Cold isolating (CI)
    Footwear labelled with CI is cold isolating according to standard EN ISO 20345. Footwear with this label is made to limit temperature fluctuations of maximum 10° C in 30 minutes at temperatures down to -17° C. Your feet are therefore protected when you work in lower temperatures or on cold surfaces.
  • Compare
  • Add to Favourites
Download PDF

Main material/upper material

Full grain leather

Size 42: 850 g

  • Product Care - Footwear - MASCOT FT088 FT088-980-88 Impregnation Spray
  • Product Care - Footwear - MASCOT FT089 FT089-980-88 Foam cleaning set

  • Ergonomic aluminium toe cap Ergonomic aluminium toe cap
    The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The ergonomically correct shaped aluminium toe cap has a spacious fit that allows place for the toes to move, e.g., when kneeling, and provides additional protection for the little toe and the big toe.
  • Textile nail protection Textile nail protection
    Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.
  • Stabilising and shock absorbing shank Stabilising and shock absorbing shank
    The specially developed multi-functional shank is made of a stiff nylon material. The shank stabilises the middle part of the foot and makes the footwear bend at the right position. This shank includes a small shock-absorbing cushioning pad. The position of the shank ensures that the heel is in constant contact with this cushioning area, which provides a good foothold.
  • Scuff cap, suitable for working on the knees Scuff cap, suitable for working on the knees
    A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.
  • Ladder grip Ladder grip
    A sole edge under the sole prevents slippage on a ladder.
  • Shock-absorbing comfort sole Shock-absorbing comfort sole
    All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.
  • Oil/petrol resistant sole Oil/petrol resistant sole
    The sole is oil and petrol resistant.
  • PU/rubber sole material, resistant to 300°C contact heat PU/rubber sole material, resistant to 300°C contact heat
    The comfort sole is made of PU and the running sole is made of rubber. Rubber is very heat resistant and can resist temperatures up to 300°C contact heat. All MASCOT PU/rubber soles are oil and petrol resistant as well as resistant to certain chemicals.
  • Non-marking sole – no scuff marks Non-marking sole – no scuff marks
    Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.
  • Waterproof Waterproof
    Look out for this symbol if you want footwear that is waterproof. Footwear bearing this symbol will keep your feet dry throughout the entire working day.
  • Cold isolating (CI) Cold isolating (CI)
    Footwear labelled with CI is cold isolating according to standard EN ISO 20345. Footwear with this label is made to limit temperature fluctuations of maximum 10° C in 30 minutes at temperatures down to -17° C. Your feet are therefore protected when you work in lower temperatures or on cold surfaces.

Main material/upper material

Full grain leather

Size 42: 850 g

  • Product Care - Footwear - MASCOT FT088 FT088-980-88 Impregnation Spray
  • Product Care - Footwear - MASCOT FT089 FT089-980-88 Foam cleaning set

Product Information

  • The BOA® Fit System is made from extremely durable, high-quality materials. BOA® allows you to dial in to a fast, effortless, precision fit.
  • The ergonomic aluminium toe cap provides more protection and gives greater freedom and comfort of movement.
  • The flexible nail protection of special textile increases comfort and protects against cold. In addition, the textile midsole is larger and better protects against nails and sharp objects in a wider area compared with a steel midsole.
  • Stabilisation with MASCOT’s patented multi-function shank, makes our footwear suitable even when working on uneven surfaces or on ladders.
  • Insulating lining of Thinsulate ™ Insulation ensures the foot stays warm despite the cold conditions.
  • The waterproof and breathable membrane in MASCOTEX® keeps feet dry all day long.
  • Sole of PU/rubber is especially designed for demanding environments and can resist temperatures up to 300° C contact heat.
  • The sole is cold and extra slip resistant, so you can stand firm even in cold conditions.
  • The sole is oil and petrol resistant.
  • BOA® Fit System The BOA® Fit System gives footwear an excellent fit and a solid foothold. BOA® consists of an adjustable dial, strong lightweight laces and friction-free guides.
  • MASCOTEX® membrane Mascotex® upper material provides breathable and waterproof footwear by means of a membrane in the material. To comply with the norm for waterproof footwear, the footwear must be able to resist water for at least four hours. Mascotex® complies with this norm.
  • Thinsulate™ Thinsulate™ Insulation is an insulating inner liner which is moisture resistant, breathable and keeps your feet warm.

Opens and fastens with BOA®, which consists of a rotational dial, laces and guides. Ergonomically formed aluminium toe cap. Nail protection of special textile material. Stabilising multi-function shank with integrated absorbing cushioning. Midsole of PU. Sole of rubber with extreme slip resistance. Removable insoles, anti-static and durable. Absorbs and removes moisture. Moulded PU scuff cap. Sole is oil and petrol resistant. Heat resistant sole up to 300°C contact heat. Ladder grip. Shock absorbing insole. Thinsulate™ insulation. Waterproof membrane of MASCOTEX®. Water-repellent and breathable outer fabric. Suitable for working on the knees. Heel cap. Non-marking sole – no scuff marks.

  • Safety Class S3 Water-repellent / waterproof shoes and boots with midsole and toe cap
  • Ultra Slip Resistant Sole Excellent traction with ultra slip resistant soles. Approved by both SRA (tested with soap on ceramics) and SRB (tested with glycerol on steel), which automatically achieves the best standard for slip-resistant soles, SRC.
  • EN ISO 20345 EN ISO 20345 is a European standard for safety footwear that ensures that safety shoes, boots and sandals conform to the necessary requirements of working in areas where safety is a high priority. All safety footwear from MASCOT® FOOTWEAR is certified in accordance with EN ISO 20345.
  • Safety Class S3
  • Ultra Slip Resistant Sole
  • EN ISO 20345
  • Men Man
  • Building and construction Building and construction
    Look for this symbol if you work as a contractor, road worker or with demolition or similar sectors.
  • Heavy industry Heavy industry
    Look for this symbol if you work with e.g. metalworking, machinery manufacture or in a foundry.
  • Offshore and wind sector Offshore and wind sector
    Look for this symbol if you need safety products for the offshore and wind sector as well as other industries.

Remarks

MASCOT's insoles with arch support (FT090, FT091, FT092) are certified for this shoe.

No liability accepted for product alterations.

Mix & Match

FT088-980
MASCOT® FOOTWEAR ACCESSORIES
transparent
NEW
  • Compare
  • Add to Favourites
  • Quick View
FT090-276
MASCOT® FOOTWEAR ACCESSORIES
black
NEW
  • Compare
  • Add to Favourites
  • Quick View
FT091-276
MASCOT® FOOTWEAR ACCESSORIES
black
NEW
  • Compare
  • Add to Favourites
  • Quick View
FT092-276
MASCOT® FOOTWEAR ACCESSORIES
black
NEW
  • Compare
  • Add to Favourites
  • Quick View

Documents

F0463-902-09 Safety Boot - black 09 - black
MASCOT® F0463-902 QR code