50% cotton/50% polyester
Industrial washing process for safety workwear and two-tone workwear.
Yes - if handled according to these care instructions.
Wash according to ISO 15797 - 8 covering industrial wash. Wash separately.
Refer to info on reflective garments below.
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Clarify between local legislation and chemical supplier.
Tumble dry (ISO 15797 A): Max outlet / exhaust temp 90ºC, use cool down. Cycle time: balanced to meet residual moisture content of +3%. Tunnel dry: (ISO 15797 B): Max incoming air temp 155/160ºC.
Close any zippers before washing.
Ladies fit DIAMOND. Light fabric. Double stitched seams on leg and crotch. Low waist and form cut waist band. Ergonomically formed trouser leg. Belt loops. Fastening with a zip. Front pockets. Back pockets. Thigh pocket with phone pocket and flap with hidden press stud and integrated ID card holder. Detachable ID card holder. CORDURA® fabric reinforced ruler pocket. With print and reflectors.
You should choose a transfer that can be heated at a maximum of 145 degrees with consideration to print on the product. Remember to check the washing instructions for the chosen transfer before washing the product.
Measuring guide: K3 - Measure the narrowest point of your waist. Your waist size is used together with your hip size to find your fit (see measuring chart).
No liability accepted for product alterations.