Functional Trousers
MASCOT® REworked
ULTIMATE STRETCH
Work Trousers
Workwear
65% polyester/35% cotton
310 g/m²
Twill.Do not soak.Wash separately.The product is certified to retain it qualities with 50 domestic washes or 50 industrial washes.The dirt-repellent finish is reactivated by tumble drying according to the washing instructions.
Description
Domestic process.
Pro Label
No.
Wash process
Wash according to ISO 6330. Wash together with similar textiles/colours.
Wash temperature
Machine wash max 60ºC.
Wash chemistry
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
Reflective garments
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Disinfection
Clarify between local legislation and chemical supplier.
Drying process
Tumble dry: Max outlet / exhaust temp 80ºC, use cool down.
Zippers
Close any zippers before washing.
Fluorescent with vertical and horizontal reflective tape. The surface treatment makes the product dirt-repellent. Shoulders with padding. Front fastening with reflective buckles. Chest pockets - one open and one with flap and magnetic fastening. Nail pockets. Belt with click buckle at waist. Holster pockets. Rear holster pocket can be buttoned up out of the way. Inner pocket with mesh material. Hammer and tool strap. Button adjustment at the side. Products with magnets must not be used by people with pacemakers/ICD or similar devices due to the risk of a magnetic reaction caused where the magnets are placed.
The product is certified with maximum 0,0600 (S - 0,3000)m² logo area. This approved area must not be exceeded. Logo respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement:
No liability accepted for product alterations.