Fluorescent and with vertical and oblique, transverse reflective strips. Breathable, wind and waterproof. Taped seams. Lining in mesh material. Detachable lined hood can be adjusted to fit over a helmet via drawstring. Adjustable wire on both sides of the hood. Mesh with ventilation under sleeves - opens with zip. High collar. Ribbed inner collar. Waterproof pen pocket on the sleeve. Fastening with zip and storm flap with press studs. Zipped inner pockets under storm flap - one designed especially for a mobile with holes for headset wire and guide loops to keep wire accessible. Zipped pocket under storm flap large enough to hold a 7-inch tablet. Flap on back of jacket can be folded up for standard back length or released for extended back. Chest pocket with a zip. D-ring. Ergonomically shaped sleeves allow for high freedom of movement. Ribbed inner waistband to keep the cold out. CORDURA® fabric reinforced cuffs with press stud fastening. Front pockets with a zip.

• OEKO-TEX® STANDARD 100 - Confidence in textiles. Tested for harmful substances.
• Hi-vis Group A
• High-visibility warning clothing for professional use X: Indicates product’s overall class, depending on the area of the fluorescent fabric and the area of reflective tape.
• When there's a job that needs to be done whatever the weather, it's important to be properly dressed. EN 343 is used to add different values to clothing that protects against the rain. Next to the symbol are three values. The first number indicates the water tightness, and the second number refers to the breathability of the overall product. Both values are divided into classes from 1-4, with 4 indicating the highest class. The lowest value is an optional test of the finished product to test the impact of rainfall from above. R indicates that the product has been tested, X indicates that the product has not been tested.

• OEKO-TEX® STANDARD 100
• Hi-Vis Group A
• EN ISO 20471 - class 3
• EN 343 4-4-X

The product is certified with maximum 0,2000m² logo area. This approved area must not be exceeded. Logo respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.

Logo placement:

• Workwear logo. Left breast. Max 8x7 cm/3,1x2.7 inches
• Workwear logo. Mid-back. Max 25x20 cm/9.8x7.8 inches
• Workwear logo. Horizontal on right sleeve. Max 10x5 cm/3.9x1.9 inches
• Workwear logo. Special placement. Contact to discuss further